PRAG 10KVA-48V INVERTER-WALL MOUNT-V + AC/DC CABLES

PRAG 10KVA 48V INVERTER W-EY (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with a peak conversion efficiency rating of 88%. Packed with powerful features, it is simply one of the most reliable and robust inverter/chargers in the market today.

PRAG 10KVA 48V INVERTER features power factor correction, sophisticated multi-stage charging and pure sine wave output with superior surge capability to meet demanding power needs of inductive loads without endangering the equipment. This series is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support sudden increase in loads without damaging the system within the time frame.

PRAG 10KVA 48V INVERTER Features

• Powerful Pure Sine Wave (PSW) Inverter/Charger
• 13 Vdc inverter Battery Recover Point (BRP) – Dedicated for Renewable Energy Systems
• High efficiency design and Power Saving Mode to conserve energy
• 8 Pre-set battery type selectors with de-sulphation for totally flat inverter batteries
• 4 Step Intelligent Battery Charging system, and Power Factor Correction (PFC)
• 8 Ms typical transfer time between utility and battery bank. This guarantees power continuity and consistency
• 15 Seconds delay before transfer when AC Resumes, and protection for load when used with generator
• Battery DOD (Depth of Discharge) setting from 50%
• Easy and straightforward installation
• Designed to operate under harsh environment
• DC Start and Automatic Self Diagnostic (ASD) function
• Compatible with Linear and Non-Linear loads
• Low DC Voltage home and office appliances support
• Up to 120Amp charging current selectable from 0%-100%
• Battery priority mode for preferred UPS configuration
   

  Inverter Output
  Model	PT-INV-10KVA/9000W 48V-Color LED, Wall-H
  Continuous Output Power	9000W
  Surge Rating(20s)	24000W
  Capable of Starting Electric Motor	8HP
  Output Waveform	Pure Sine wave/Same as input(Bypass mode)
  Nominal Efficiency	>88%(Peak)
  Line Mode Efficiency	>95%
  Power Factor	0.9-1.0
  Nominal Output Voltage rms	220-230-240Vac
  Output Voltage Regulation	±10% RMS
  Output Frequency	50± 0.3Hz/60± 0.3Hz
  Short Circuit Protection	Yes, Current Limit Function (Fault after 1sec)
  Typical transfer Time	10ms(Max)
  THD	< 10%
  DC Input
  Nominal Input Voltage	12.0Vdc
  	( *2 for 24Vdc, *4 for 48Vdc)
  Minimum Start Voltage	10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
  Low Battery Alarm	10.5Vdc/11.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
  Low Battery Trip	10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
  High Voltage Alarm & Fault	16.0Vdc ( *2 for 24Vdc, *4 for 48Vdc)
  High DC Input Recovery	15.5Vdc
  Low Battery voltage recover	15.5Vdc ( *2 for 24Vdc, *4 for 48Vdc)
  Idle Consumption-Search Mode	< 25 W when Power Saver On
  Charge
  Input Voltage Range	Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC
  Input Frequency Range	Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz
  Output Voltage	Depends on battery type
  Charger Breaker Rating	40A
  Max Charge Rate	50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V)
  Over Charge Protection Shutdown	15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
  Charger curve(4 stage constant current) 4 step digital controlled progressive charge	Battery types ( *2 for 24Vdc, *4 for 48Vdc)
  Battery type	Float Vdc
  Gel U.S.A	13.7
  A.G.M 1	13.4
  A.G.M 2	13.7
  Sealed Lead Acid	13.6
  Gel Euro	13.8
  Open Lead Acid	13.3
  Calcium	13.6
  De-sulphation	15.5 for 4hrs
  Remote Control	Yes. Optional
  Bypass & Protection
  Input Voltage Waveform	Sine wave (Grid or Generator)
  Nominal Voltage	220Vac
  Low Voltage Trip	184V/140V±4%
  Low Voltage re engage	194V/150V±4%
  High Voltage Trip	253V/270V±4%
  High Voltage re engage	243V/260V±4%
  Max Input AC Voltage	280VAC
  Nominal Input Frequency	50Hz or 60Hz (Auto detect)
  Low Freq Trip	Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Wide:40±0.3Hz for 50Hz/60Hz
  Low Freq re engage	Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz Wide:42±0.3Hz for 50Hz/60Hz
  High Freq Trip	Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz Wide: 70±0.3Hz for 50Hz/60Hz
  High Freq re engage	Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz Wide: 68±0.3Hz for 50Hz/60Hz
  Output Short circuit protection	Circuit breaker
  Bypass breaker rating	63A
  Transfer switch rating	80amp for UL
  Max bypass current	80amp
  Mechanical Specification
  Mounting	Wall mount
  Inverter Dimensions(L*W*H)	588*415*200mm
  Inverter Weight	66KG
  Shipping Dimensions(L*W*H)	750x520x310mm
  Shipping Weight	68KG
  Display	Status LEDs / Status LEDs+LCD