APC Smart-UPS 2200VA LCD 230V | SMT2200I (CC)

APC Smart-UPS 2200VA LCD 230V | SMT2200I

 

SMT2200I

 

 

APC Smart-UPS 2200VA LCD 230V

 

·         Cold-start capable

 

Provides temporary battery power when the utility power is out.

 

·         Energy meter

 

Provides actual kilowatt hours of usage for energy conscious users.

 

·         Green mode

 

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

 

·         High online efficiency

 

Reduces utlility costs, generates less heat.

 

·         Intuitive LCD interface

 

Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

 

·         Predictive replace battery date

 

Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

 

·         Pure sine wave output on battery

 

Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

 

·         Sequenced network shutdown and reboot

 

Customize network shutdown and reboot sequence of connected servers and UPSs.

 

·         Single switched outlet group

 

Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.

 

·         SmartSlot

 

Customize UPS capabilities with management cards.

 

·         StruxureWare Data Center Expert compatible

 

Enables centralized management via StruxureWare Data Center Expert.

 

·         Temperature-compensated battery charging

 

Prolongs battery life by regulating the charge voltage according to battery temperature.

 

Smart-UPSFeatures & Benefits

Serviceability

·         Predictive failure notification

 

Provides early-warning fault analysis ensuring proactive component replacement.

 

·         Resettable circuit breakers

 

Enables a quick recovery from overload events.

 

·         Battery failure notification

 

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

 

·         User-replaceable batteries

 

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

 

·         Hot-swappable batteries

 

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

 

Marketing Features

·         Peace of mind that comes with full equipment compatibility and reliability of a leader

 

Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

 

·         Smarter productivity  with ability to tailor to your specific application needs

 

Intuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.

 

·         Save time with easy and convenient remote accessibility

 

Network manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities.

 

·         Avoids costly power problems by keeping your IT equipment and data safe and available

 

Network grade power conditioning protects from damaging surges and disruptive noise. Solid state automatic voltage regulation boosts low input voltage up to 30% and trims high voltage up to 12% without battery operation. Reliable battery back-up capacity to power through outages or gracefully shutdown systems

 

·         Low operating and maintenance costs with high efficiency, proven reliability and intelligent battery management

 

Patented green operating mode achieves efficiencies over 97%. Smart-ups was the first network UPS to be Energy Star certified. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Dynamic battery replacement date indicator and automatic self tests insure battery reliability and warn in advance of needing replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Designed and manufactured by APC for over 23 years, Smart-UPS is the world’s most trusted network UPS with over 25 million units sold.

 

Manageability

·         Network manageable

 

Provides remote power management of the UPS over the network.

 

·         Disconnected battery notification

 

Warns when a battery is not available to provide backup power.

 

·         Serial connectivity

 

Provides management of the UPS via a serial port.

 

·         USB connectivity

 

Provides management of the UPS via a USB port (not available on all models).

 

·         Audible alarms

 

Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

 

·         LED status indicators

 

Quickly understand unit and power status with visual indicators.

 

Safety

·         Safety-agency approved

 

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

 

Availability

·         Disconnected battery notification

 

Warns when a battery is not available to provide backup power.

 

·         Automatic restart of loads after UPS shutdown

 

Automatically starts up the connected equipment upon the return of utility power.

 

·         Automatic self-test

 

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

 

·         Boost and Trim Automatic Voltage Regulation (AVR)

 

Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

 

·         Power conditioning

 

Protects connected loads from surges, spikes, lightning, and other power disturbances.

 

·         Temperature-compensated battery charging

 

Prolongs battery life by regulating the charge voltage according to battery temperature.

 

·         Intelligent battery management

 

Maximizes battery performance, life, and reliability through intelligent, precision charging.

 

Adaptability

·         Adjustable voltage sensitivity

 

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

 

·         Adjustable voltage-transfer points

 

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

 

Output

·         Output power capacity

 

1.98 KWatts / 2.2 kVA

 

·         Max Configurable Power (Watts)

 

1.98 KWatts / 2.2 kVA

 

·         Nominal Output Voltage

 

230V

 

·         Output Voltage Note

 

Configurable for 220 : 230 or 240 nominal output voltage

 

·         Output Voltage Distortion

 

Less than 5% at full load

 

·         Output Frequency (sync to mains)

 

47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal

 

·         Topology

 

Line Interactive

 

·         Waveform type

 

Sine wave

 

·         Output Connections

 

(1) IEC 320 C19 (Battery Backup)

 

(8) IEC 320 C13 (Battery Backup)

 

(2) IEC Jumpers (Battery Backup)

 

·         Transfer Time

 

2ms typical

 

Input

·         Nominal Input Voltage

 

230V

 

·         Input frequency

 

50/60 Hz +/- 3 Hz (auto sensing)

 

·         Input Connections

 

IEC-320 C20, Schuko CEE 7 / EU1-16P, British BS1363A

 

·         Input voltage range for main operations

 

160 - 286V

 

·         Input voltage adjustable range for mains operation

 

151 - 302V

 

·         Number of Power Cords

 

1

 

·         Other Input Voltages

 

220, 240

 

Batteries & Runtime

·         Battery type

 

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

 

·         Typical recharge time

 

3hour(s)

 

·         Replacement Battery

 

RBC55

 

·         Expected Battery Life (years)

 

3 - 5

 

·         RBC Quantity

 

1

 

·         Runtime

 

View Runtime Graph

 

View Runtime Chart

 

·         Efficiency

 

View Efficiency Graph

 

Communications & Management

·         Interface Port(s)

 

SmartSlot

 

·         Control panel

 

Multi-function LCD status and control console

 

·         Audible Alarm

 

Alarm when on battery : distinctive low battery alarm : configurable delays

 

·         Emergency Power Off (EPO)

 

Yes

 

·         Available SmartSlot™ Interface Quantity

 

1

 

Surge Protection and Filtering

·         Surge energy rating

 

365Joules

 

·         Filtering

 

Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

 

Physical

·         Maximum Height

 

435mm , 43.5CM

 

·         Maximum Width

 

197mm , 19.7CM

 

·         Maximum Depth

 

544mm , 54.4CM

 

·         Net Weight

 

48.8KG

 

·         Shipping weight

 

61.9KG

 

·         Shipping Height

 

699mm , 69.9CM

 

·         Shipping Width

 

381mm , 38.1CM

 

·         Shipping Depth

 

762mm , 76.2CM

 

·         Color

 

Black

 

·         Units per Pallet

 

9.0

 

Environmental

·         Operating Temperature

 

0 - 40 °C

 

·         Operating Relative Humidity

 

0 - 95 %

 

·         Operating Elevation

 

0-3000meters

 

·         Storage Temperature

 

-15 - 45 °C

 

·         Storage Relative Humidity

 

0 - 95 %

 

·         Storage Elevation

 

0-15000meters

 

·         Audible noise at 1 meter from surface of unit

 

45.0dBA

 

·         Online thermal dissipation

 

275.0BTU/hr

 

Conformance

·         Approvals

 

CE, CSA, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, VDE

 

·         Standard warranty

 

3 years repair or replace (excluding battery) and 2 year for battery, optional on-site warranties available, optional extended warranties available

 

Sustainable Offer Status

·         RoHS

 

Compliant

 

·         REACH

 

REACH: Contains No SVHCs

 

·         PEP

 

Available in Documentation tab

 

·         EOLI

 

Available in Documentation tab